Professional Attic Fan Installation in Savannah
Installing an attic fan in your Savannah home is one of the most effective ways to reduce cooling costs, extend roof life, and improve indoor comfort during hot summer months. Attics can reach temperatures of 140-150°F on a sunny day, and this super-heated air radiates downward into your living spaces, forcing your air conditioner to work harder and run longer. A properly installed attic fan exhausts this trapped heat before it can penetrate your ceiling insulation, lowering attic temperatures by 30-50°F and reducing your cooling costs by 20-30%. Our licensed electricians handle the complete attic fan installation process — from calculating the correct CFM rating for your attic square footage to running dedicated circuits, mounting the fan securely, and connecting thermostats or humidistats for fully automatic operation.
We size each attic fan based on your attic's exact dimensions and ventilation needs. The standard formula is 1 CFM (cubic foot per minute) for every 2-3 square feet of attic floor space. For a typical 1,500 square foot attic, we install a 500-750 CFM fan. For larger attics up to 2,500 square feet, we install 800-1,200 CFM fans. For attics with limited intake venting (soffit, gable, or roof vents), we calculate a lower CFM rating to avoid creating negative pressure that could pull conditioned air from your living spaces. We also consider your attic's insulation level — well-insulated attics retain less heat and may need smaller fans than poorly insulated spaces. We never exceed 70-80% of your attic's natural venting capacity, ensuring balanced airflow that protects your roof structure and shingles.
We offer two primary fan configurations to match your home's architecture and your budget. Roof-mounted fans install directly through the roof deck, typically on the back slope away from street view. These fans exhaust heat straight up, taking advantage of natural convection for maximum efficiency. We include a watertight flashing kit with step flashing and ice dam protection to prevent any possibility of roof leaks. Roof-mounted fans take 4-5 hours to install and require no changes to your existing gable vents or soffits. Gable-mounted fans install in existing gable vents, requiring no roof penetrations whatsoever. These fans take 3-4 hours to install and are ideal for homes where roof access is difficult or homeowners prefer to avoid any roof modifications. Both configurations include heavy-gauge metal construction, sealed ball bearings, thermally protected motors, and bird screens to prevent wildlife entry.
We connect each attic fan to adjustable thermostats (settable from 80°F to 120°F) and optional humidistats (settable from 40% to 80% relative humidity). The thermostat activates the fan when attic temperatures exceed your preset limit — typically 100-110°F for most Savannah homes. The humidistat activates the fan when moisture levels rise, which is especially important in attics where bathroom or kitchen exhaust fans improperly vent. We mount these controls in accessible locations, usually near the attic access panel or in a nearby hallway closet. We also offer solar-powered attic fans for homeowners seeking off-grid, zero-electricity ventilation. Solar fans require no new circuits, operate only when the sun shines, and may qualify for federal tax credits of up to 30% of the installation cost.
We run dedicated 15-amp circuits from your electrical panel to each attic fan, ensuring reliable operation without sharing power with other devices. We install weatherproof electrical boxes and connections rated for high-temperature attic environments. For roof-mounted fans, we use high-temperature wiring rated for up to 90°C (194°F) to withstand the extreme heat near the roof deck. We install GFCI protection where required by local codes and ensure all connections are properly grounded. We also install manual shut-off switches near the attic access so you can override the automatic controls when needed for maintenance or during winter months when attic fans are not required.
We mount each fan using vibration-dampening brackets and rubber isolators to prevent noise transfer to living spaces below. Roof-mounted fans attach to reinforced roof framing with lag bolts, not just decking screws. Gable-mounted fans mount to framing members with structural brackets, not just through the louvered vent. We balance all fan blades and verify proper operation before leaving the site. We test the thermostat by temporarily lowering the set point, confirm the fan activates and reaches full speed, then restore the correct setting. We test the humidistat by applying moisture to the sensor and verifying activation. We also verify proper intake venting by checking that soffit, gable, or roof vents are unobstructed and provide adequate airflow to match the fan's exhaust capacity.
Let us help you lower your cooling bills, extend your roof life, and enjoy a more comfortable Savannah home with reliable, code-compliant attic fan installation built on decades of experience and a commitment to quality craftsmanship.